LOGO
Mobile | Mail | Language:
  • 电话咨询

  • 075528068986
technical support
FAQ Home>>Support>>FAQ
   
Pairing method of the remote curtain controller
2011/1/10

Pairing method of the remote curtain controller

 

 

Open: press the OPEN button on the curtain controller for 5 seconds, the buzzer will sound "Di", then release the button, press the OPEN button on the remote controller, the curtain controller receives signal and sound "Di-Di", the pairing is finished. Press the button again or after 5 sec, the controller quit pairing status.

 

Stop: press the STOP button on the curtain controller for 5 seconds, the buzzer will sound "Di", then release the button, press the STOP button on the remote controller, the curtain controller receives signal and sound "Di-Di", the pairing is finished. Press the button again or after 5 sec, the controller quit pairing status.

 

Close: press the CLOSE button on the curtain controller for 5 seconds, the buzzer will sound "Di", then release the button, press the CLOSE button on the remote controller, the curtain controller receives signal and sound "Di-Di", the pairing is finished. Press the button again or after 5 sec, the controller quit pairing status.

 

Delete: Press the button you will delete for 10 sec, the buzzer will sound "Di" at 5 sec, do not release the button, at 10 sec, the buzzer will sound "Di--" longer, then all the pad or remote controller are deleted.

 

Note:

(1) When the curtain controller is paired by tablet pad, please make pairing OPEN for open function and CLOSE for close function.

 

(2) Each gang can pair up to 20 different codes, if make the 21st pairing, the 1st one will be covered.

 

 

 

chnsmart.com

 

 

 

  ©2010 CHN SMART LIMITED - 粤ICP备08118273号 Copyright / Designed by: Albert - admin - Tel: +86-755-2806 8986 facebook  twitter